Double-Flanged Tapers
Double-Flanged Tapers for fixed-flange diameter-transition enquiries. Send the required sizes, working pressure, connection details and project drawing for review.
Présentation du produit
Double-Flanged Tapers is supported by owned ISO2531 fixed-flange catalogue pages 26-27. The source shows DN x dn, T, t and L rows plus Mass columns labelled PN10, PN16 and PN25, with taper drawing. Where PN10, PN16 and PN25 appear under the Mass heading, they identify catalogue mass columns and do not alone prove current working pressure or offerability. Treat the catalogue as historical selection evidence: confirm current size availability, pressure applicability, material, coating, flange drilling or socket details, dimensions, mass and project suitability with Aquafitting before quotation.
2016 Tour Dates | Location | Tickets |
|---|
Références techniques
Source: owned ISO2531 fixed-flange catalogue pages 26-27. Historical catalogue rows support selection only. Current offerability, exact size combination, pressure, material, gasket, coating, drilling/connection dimensions, mass, standard applicability and project suitability require Aquafitting confirmation.
Application
Use this page for fixed-flange diameter-transition enquiries. Confirm the mating pipe/flange or socket arrangement, required dimensions, working pressure and project conditions before selection.
Sélection du produit
product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available
Questions fréquentes sur le produit
What should I send for a Double-Flanged Tapers enquiry?
Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.
What technical evidence is available for Double-Flanged Tapers?
Aquafitting-owned evidence is recorded as owned ISO2531 fixed-flange catalogue pages 26-27, showing DN x dn, T, t and L rows plus Mass columns labelled PN10, PN16 and PN25, with taper drawing. It is historical selection evidence and must be checked against the current enquiry before quotation.
Which details still require Aquafitting confirmation?
Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.
Téléchargements techniques
Fiche produit | Langue |
|---|
VERIFIED PRODUCT VIDEO Product videos appear only when the exact product identity has been confirmed. Use the product sheet and technical enquiry route for selection.
Double-Flanged 45° Bend
Fixed Flange Fittings
Double-Flanged 45° Bend for 45-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.
Double-Flanged 11.25° Bend
Fixed Flange Fittings
Double-Flanged 11.25° Bend for 11.25-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.
All-Flanged Tees
Fixed Flange Fittings
All-Flanged Tees for fixed-flange branch enquiries with specified main and branch sizes. Send the required sizes, working pressure, connection details and project drawing for review.