PE Flange Adaptor — Compression-Grip Series
Connect a PE pipe end to a flanged valve or fitting. Match the actual PE pipe outside diameter and the mating flange. Include SDR or wall thickness and service conditions in the selection.
Pipe compatibility
PE pipe at the pipe-side connection. Confirm SDR or wall thickness and the support-insert arrangement for the selected configuration.
Product overview
Connect a PE pipe end to a flanged valve or fitting.
Pipe compatibility
PE pipe at the pipe-side connection. Confirm SDR or wall thickness and the support-insert arrangement for the selected configuration.
Connection arrangement
PE pipe end → flanged valve or fitting
Pipe connection and flange interface
Pipe-side assembly
Use the P13 assembly for the selected PE pipe outside diameter. Review the current product drawing for the seal and grip arrangement.
Flange interface
Match the flange DN and drilling to the mating valve or fitting. Pipe outside diameter and flange DN are separate checks.
Choose the series
P13/P14 belong to the Compression Grip family. P11/P12 belong to the Lock Ring family. Select the required family before comparing dimensions.
Catalogue dimensions
Source: AQUAFITTING English catalogue 2023, page 13. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. P13 design only; do not substitute the P11 dimensions.
| DN | Pipe OD | D | L | L1 |
|---|---|---|---|---|
| DN40 | OD40 | 130 | 115 | 65 |
| DN50 | OD50 | 140 | 115 | 65 |
| DN50 | OD63 | 150 | 115 | 65 |
| DN65 | OD75 | 150 | 115 | 65 |
| DN80 | OD90 | 180 | 115 | 65 |
| DN100 | OD110 | 200 | 115 | 65 |
| DN125 | OD125 | 240 | 115 | 65 |
| DN125 | OD140 | 254 | 115 | 65 |
| DN150 | OD160 | 270 | 115 | 65 |
| DN150 | OD180 | 286 | 115 | 65 |
| DN200 | OD200 | 325 | 140 | 65 |
| DN200 | OD225 | 325 | 160 | 85 |
| DN250 | OD250 | 375 | 160 | 85 |
| DN250 | OD280 | 390 | 160 | 85 |
| DN300 | OD315 | 420 | 160 | 88 |
Technical evidence
Review the product identity and available resources, then send the required size or measured outside diameter, pipe material, connection details, operating conditions, quantity, destination and supporting files.
Technical Downloads
Product summary · PDF · English · V2026.08 · 105 KB
Open technical drawing at full size
Open dimension table at full size
Historical catalogue references
Original reference images are retained below. Confirm current dimensions, pressure, materials and suitability for the selected configuration before quotation.
Drawing / table / product reference 1 · Drawing / table / product reference 2 · Drawing / table / product reference 3
Product FAQs
Which product should I specify?
Specify PE Flange Adaptor – Compression-Grip Type, Short Pattern, so that AQUAFITTING can review the exact configuration.
Which PE coupling belongs to the same design family?
PE Coupling – Compression-Grip Type belongs to the same Compression-Grip Type design family. The Lock-Ring Type flange adaptor and coupling form a separate design family.
What information belongs in my enquiry?
Include the product, size, connection details, operating requirements, quantity and destination.
Product selection
product name; DN or nominal size; actual pipe outside diameter; pipe material; end condition; working pressure; quantity; destination; required drawing or catalogue
