Loose-Flanged 90° Bend
Change pipeline direction through 90° with a loose-flanged bend. Specify the bend angle and nominal size together.
Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.
Product overview
Change pipeline direction through 90° with a loose-flanged bend.
Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.
Connection arrangement
Flange → 90° bend → flange
Connection and selection
90° direction change
Use the product-specific bend drawing to check the route, installation length and clearance.
Flange interface
Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.
Size and installation
Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.
Catalogue dimensions
Source: AQUAFITTING Loose Flange Fittings catalogue, page 5. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. Source size and length values are retained; confirm the selected drawing.
Technical Downloads
Product FAQs
What should I send for a Loose-Flanged 90° Bend enquiry?
Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.
What technical evidence is available for Loose-Flanged 90° Bend?
The loose-flange catalogue page shows 90-degree bend DN and L rows, PN10/16 notation, EN545 pattern references and section drawing. Dimensions are confirmed against your enquiry before quotation.
Which details still require Aquafitting confirmation?
Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.
Product selection
product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available
