top of page

Double-Flanged 90° Bend

Change pipeline direction through 90° between two flanges. Specify the bend angle and flange size together.

Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Double-flanged 90-degree bend — AQUAFITTING catalogue photograph
Request a Quote

Product overview

Change pipeline direction through 90° between two flanges.

Connection interface

Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Connection arrangement

Flange → 90° bend → flange

Request a Quote

Connection and selection

90° direction change

Match the bend angle to the pipeline route. Check the drawing for installation length and clearance.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Request a Quote

Catalogue dimensions

Source: AQUAFITTING fixed-flange and T-type joint catalogue, page 18. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering.

Double-Flanged 90° Bend — Catalogue dimensions
DNTL
807.0165
1007.2180
1507.8220
2008.4260
2509.0350
3009.6400
35010.2450
40010.8500
45011.4550
50012.0600
60013.2700
70014.4800
80015.6900
90016.81000
100018.01100
110019.21200
120020.41300
140022.81350
150024.01400
160025.21450
180027.61500

Technical Downloads

Request current drawings and product documents for your selected configuration.

Catalogues & Downloads

Product FAQs

What should I send for a Double-Flanged 90° Bend enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Double-Flanged 90° Bend?

Our catalogue reference (ISO2531 fixed-flange catalogue page 18) shows DN, T and L rows plus Mass columns labelled PN10, PN16 and PN25, with product drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Request a Quote

Double-Flanged 90° Bend

Double-flanged 90-degree bend — AQUAFITTING catalogue photograph

Change pipeline direction through 90° between two flanges. Specify the bend angle and flange size together.

Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Request a Quote

Overview · Specifications · Downloads

Overview

Catalogue dimensions

DN
T
L
80
7.0
165
100
7.2
180
150
7.8
220
200
8.4
260
250
9.0
350
300
9.6
400
350
10.2
450
400
10.8
500
450
11.4
550
500
12.0
600
600
13.2
700
700
14.4
800
800
15.6
900
900
16.8
1000
1000
18.0
1100
1100
19.2
1200
1200
20.4
1300
1400
22.8
1350
1500
24.0
1400
1600
25.2
1450
1800
27.6
1500

Source: AQUAFITTING fixed-flange and T-type joint catalogue, page 18. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering.

80

T: 7.0 · L: 165

100

T: 7.2 · L: 180

150

T: 7.8 · L: 220

200

T: 8.4 · L: 260

250

T: 9.0 · L: 350

300

T: 9.6 · L: 400

350

T: 10.2 · L: 450

400

T: 10.8 · L: 500

450

T: 11.4 · L: 550

500

T: 12.0 · L: 600

600

T: 13.2 · L: 700

700

T: 14.4 · L: 800

800

T: 15.6 · L: 900

900

T: 16.8 · L: 1000

1000

T: 18.0 · L: 1100

1100

T: 19.2 · L: 1200

1200

T: 20.4 · L: 1300

1400

T: 22.8 · L: 1350

1500

T: 24.0 · L: 1400

1600

T: 25.2 · L: 1450

1800

T: 27.6 · L: 1500

Product overview

Change pipeline direction through 90° between two flanges.

Connection interface

Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Connection arrangement

Flange → 90° bend → flange

Request a Quote

Technical evidence

Review the product identity and available resources, then send the required size or measured outside diameter, pipe material, connection details, operating conditions, quantity, destination and supporting files.

Double-Flanged 90° Bend catalogue drawing, available on request.
Double-Flanged 90° Bend catalogue dimension table, available on request.

Connection and selection

90° direction change

Match the bend angle to the pipeline route. Check the drawing for installation length and clearance.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Request a Quote

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Request a Quote

Product FAQs

What should I send for a Double-Flanged 90° Bend enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Double-Flanged 90° Bend?

Our catalogue reference (ISO2531 fixed-flange catalogue page 18) shows DN, T and L rows plus Mass columns labelled PN10, PN16 and PN25, with product drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Materials & standards

Body
Ductile iron EN-GJS-450-10 or EN-GJS-500-7


Gaskets (where supplied)
EPDM (WRAS approved material) or NBR


Bolts and nuts (where supplied)
Zinc-plated carbon steel, Dacromet-coated or stainless steel


Coating
Epoxy powder coating, 250 μm nominal (WRAS approved material)


Pressure rating
PN10, PN16, PN25 or PN40, as shown in the size table for each model


Standard
ISO 2531


Material, bolt and coating options are confirmed in the quotation.
View certificates →

Technical Downloads

Request current drawings and product documents for your selected configuration.

Catalogues & Downloads

Blank Flanges

Blank Flanges

Fixed Flange Fittings

Fixed blank flange for pipeline closure and flanged connection enquiries. Send DN, working pressure and flange drilling for technical review.

VIEW PRODUCT
Double-Flanged 90° Duck Foot Bend

Double-Flanged 90° Duck Foot Bend

Fixed Flange Fittings

Double-Flanged 90° Duck Foot Bend for 90-degree duck-foot bend enquiries requiring base and flange review. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT
Double-Flanged 45° Bend

Double-Flanged 45° Bend

Fixed Flange Fittings

Double-Flanged 45° Bend for 45-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT
bottom of page