Double-Flanged 45° Bend

Connection and selection

45° direction change

Match the bend angle to the pipeline route. Check the drawing for installation length and clearance.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Product summary · PDF · English

Catalogue dimensions

Source: AQUAFITTING fixed-flange and T-type joint catalogue, page 19. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. Select the matching nominal size and drawing; lengths vary with the fitting geometry.

Double-Flanged 45° Bend — Catalogue dimensions
DN	T	L
80	7.0	130
100	7.2	140
150	7.8	160
200	8.4	180
250	9.0	350
300	9.6	400
350	10.2	300
400	10.8	325
450	11.4	350
500	12.0	375
600	13.2	425
700	14.4	480
800	15.6	530
900	16.8	580
1000	18.0	630
1100	19.2	695
1200	20.4	750
1400	22.8	775
1500	24.0	810
1600	25.2	845
1800	27.6	910
2000	30	980

Technical Downloads

Catalogues & Downloads

Product FAQs

What should I send for a Double-Flanged 45° Bend enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Double-Flanged 45° Bend?

Our catalogue reference (ISO2531 fixed-flange catalogue page 19) shows DN, T and L rows plus Mass columns labelled PN10, PN16 and PN25, with product drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Product summary · PDF · English

Double-Flanged 45° Bend

Change pipeline direction through 45° between two flanges. Specify the bend angle and flange size together.

Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Overview · Specifications · Downloads

Overview

Catalogue dimensions

DN	T	L
80	7.0	130
100	7.2	140
150	7.8	160
200	8.4	180
250	9.0	350
300	9.6	400
350	10.2	300
400	10.8	325
450	11.4	350
500	12.0	375
600	13.2	425
700	14.4	480
800	15.6	530
900	16.8	580
1000	18.0	630
1100	19.2	695
1200	20.4	750
1400	22.8	775
1500	24.0	810
1600	25.2	845
1800	27.6	910
2000	30	980

Source: AQUAFITTING fixed-flange and T-type joint catalogue, page 19. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. Select the matching nominal size and drawing; lengths vary with the fitting geometry.

80

T: 7.0 · L: 130

100

T: 7.2 · L: 140

150

T: 7.8 · L: 160

200

T: 8.4 · L: 180

250

T: 9.0 · L: 350

300

T: 9.6 · L: 400

350

T: 10.2 · L: 300

400

T: 10.8 · L: 325

450

T: 11.4 · L: 350

500

T: 12.0 · L: 375

600

T: 13.2 · L: 425

700

T: 14.4 · L: 480

800

T: 15.6 · L: 530

900

T: 16.8 · L: 580

1000

T: 18.0 · L: 630

1100

T: 19.2 · L: 695

1200

T: 20.4 · L: 750

1400

T: 22.8 · L: 775

1500

T: 24.0 · L: 810

1600

T: 25.2 · L: 845

1800

T: 27.6 · L: 910

2000

T: 30 · L: 980

Product overview

Change pipeline direction through 45° between two flanges.

Connection interface

Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Connection arrangement

Flange → 45° bend → flange

Technical evidence

Review the product identity and available resources, then send the required size or measured outside diameter, pipe material, connection details, operating conditions, quantity, destination and supporting files.

Request a Quote

Double-Flanged 45° Bend catalogue drawing, available on request.

Double-Flanged 45° Bend catalogue dimension table, available on request.

Connection and selection

45° direction change

Match the bend angle to the pipeline route. Check the drawing for installation length and clearance.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Product summary · PDF · English

Product FAQs

What should I send for a Double-Flanged 45° Bend enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Double-Flanged 45° Bend?

Our catalogue reference (ISO2531 fixed-flange catalogue page 19) shows DN, T and L rows plus Mass columns labelled PN10, PN16 and PN25, with product drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Materials & standards

Body
Ductile iron EN-GJS-450-10 or EN-GJS-500-7

Gaskets (where supplied)
EPDM (WRAS approved material) or NBR

Bolts and nuts (where supplied)
Zinc-plated carbon steel, Dacromet-coated or stainless steel

Coating
Epoxy powder coating, 250 μm nominal (WRAS approved material)

Pressure rating
PN10, PN16, PN25 or PN40, as shown in the size table for each model

Standard
ISO 2531

Material, bolt and coating options are confirmed in the quotation.
View certificates →

Technical Downloads

Request a Quote

Catalogues & Downloads

Double-Flanged 90° Bend

Fixed Flange Fittings

Double-Flanged 90° Bend for 90-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

Double-Flanged 90° Duck Foot Bend

Fixed Flange Fittings

Double-Flanged 90° Duck Foot Bend for 90-degree duck-foot bend enquiries requiring base and flange review. Send the required sizes, working pressure, connection details and project drawing for review.

Double-Flanged 22.5° Bend

Fixed Flange Fittings

Double-Flanged 22.5° Bend for 22.5-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

Double-Flanged 11.25° Bend

Fixed Flange Fittings

Double-Flanged 11.25° Bend for 11.25-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

Double-Flanged Tapers

Fixed Flange Fittings

Double-Flanged Tapers for fixed-flange diameter-transition enquiries. Send the required sizes, working pressure, connection details and project drawing for review.