Double-Flanged Tapers

Name: Double-Flanged Tapers
Brand: AQUAFITTING

Connect flanged components of different nominal sizes. A double-flanged reducer connects different nominal flange sizes. Use the dedicated product drawing to match the installation arrangement.

Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Aquafitting Double-Flanged Tapers product view on a controlled background.

Request a Quote Product summary · PDF · English

Product overview

Connect flanged components of different nominal sizes.

Connection interface

Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Connection arrangement

Larger flange DN → smaller flange dn

Request a Quote

Connection and selection

Two flange sizes

Specify both nominal sizes and the installation length. Use the taper drawing for the selected pair.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Request a Quote

Catalogue dimensions

Source: AQUAFITTING fixed-flange and T-type joint catalogue, page 26–27. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. The two 400 × 300 length variants are retained separately; confirm the selected configuration.

Double-Flanged Tapers — Catalogue dimensions
DN × dn	T	t	L
100 × 80	7.2	7.0	200
150 × 80	7.8	7.0	400
150 × 100	7.8	7.2	300
200 × 100	8.4	7.2	600
200 × 150	8.4	7.8	300
250 × 150	9.0	7.8	600
250 × 200	9.0	8.4	300
300 × 150	9.6	7.8	650
300 × 200	9.6	8.4	600
300 × 250	9.6	9.0	300
350 × 200	10.2	8.4	650
350 × 250	10.2	9.0	600
350 × 300	10.2	9.6	300
400 × 200	10.8	8.4	700
400 × 250	10.8	9.0	650
400 × 300	10.8	9.6	300
400 × 300	10.8	9.6	600
400 × 350	10.8	10.2	300
450 × 250	11.4	9.0	700
450 × 300	11.4	9.6	650
450 × 350	11.4	10.2	600
450 × 400	11.4	10.8	300
500 × 300	12.0	9.6	700
500 × 350	12.0	10.2	650
500 × 400	12.0	10.8	600
500 × 450	12.0	11.4	300
600 × 350	13.2	10.2	750
600 × 400	13.2	10.8	700
600 × 450	13.2	11.4	650
600 × 500	13.2	12.0	600
700 × 400	14.4	10.8	800
700 × 450	14.4	11.4	750
700 × 500	14.4	12.0	700
700 × 600	14.4	13.2	600
800 × 450	15.6	11.4	900
800 × 500	15.6	12.0	800
800 × 600	15.6	13.2	700
800 × 700	15.6	14.4	600
900 × 500	16.8	12.0	1000
900 × 600	16.8	13.2	800
900 × 700	16.8	14.4	700
900 × 800	16.8	15.6	600
1000 × 600	18	13.2	1000
1000 × 700	18	14.4	800
1000 × 800	18	15.6	700
1000 × 900	18	16.8	600
1100 × 700	19.2	14.4	1000
1100 × 800	19.2	15.6	800
1100 × 900	19.2	16.8	700
1100 × 1000	19.2	18.0	600
1200 × 700	20.4	14.4	1345
1200 × 800	20.4	15.6	1160
1200 × 900	20.4	16.8	975
1200 × 1000	20.4	18.0	790
1200 × 1100	20.4	19.2	605
1400 × 800	22.8	15.6	1590
1400 × 900	22.8	16.8	1405
1400 × 1000	22.8	18.0	1220
1400 × 1100	22.8	19.2	1035
1400 × 1200	22.8	20.4	850
1500 × 900	24.0	16.8	1620
1500 × 1000	24.0	18.0	1435
1500 × 1100	24.0	19.2	1250
1500 × 1200	24.0	20.4	1065
1500 × 1400	24.0	22.8	695
1600 × 1000	25.2	18.0	1650
1600 × 1100	25.2	19.2	1465
1600 × 1200	25.2	20.4	1280
1600 × 1400	25.2	22.8	910
1600 × 1500	25.2	24.0	725
1800 × 1100	27.6	19.2	1895
1800 × 1200	27.6	20.4	1710
1800 × 1400	27.6	22.8	1340
1800 × 1500	27.6	24.0	1155
1800 × 1600	27.6	25.2	970
2000 × 1200	30	20.4	2140
2000 × 1400	30	22.8	1770
2000 × 1500	30	24.0	1585
2000 × 1600	30	25.2	1400
2000 × 1800	30	27.6	1030

Technical Downloads

Product summary · PDF · English

Catalogues & Downloads

Product FAQs

What should I send for a Double-Flanged Tapers enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Double-Flanged Tapers?

The ISO2531 fixed-flange catalogue (pages 26-27) shows DN x dn, T, t and L rows plus Mass columns labelled PN10, PN16 and PN25, with taper drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Request a Quote

Double-Flanged Tapers

Connect flanged components of different nominal sizes. A double-flanged reducer connects different nominal flange sizes. Use the dedicated product drawing to match the installation arrangement.

Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Product summary · PDF · English

Request a Quote

Overview · Specifications · Downloads

Overview

Catalogue dimensions

DN × dn	T	t	L
100 × 80	7.2	7.0	200
150 × 80	7.8	7.0	400
150 × 100	7.8	7.2	300
200 × 100	8.4	7.2	600
200 × 150	8.4	7.8	300
250 × 150	9.0	7.8	600
250 × 200	9.0	8.4	300
300 × 150	9.6	7.8	650
300 × 200	9.6	8.4	600
300 × 250	9.6	9.0	300
350 × 200	10.2	8.4	650
350 × 250	10.2	9.0	600
350 × 300	10.2	9.6	300
400 × 200	10.8	8.4	700
400 × 250	10.8	9.0	650
400 × 300	10.8	9.6	300
400 × 300	10.8	9.6	600
400 × 350	10.8	10.2	300
450 × 250	11.4	9.0	700
450 × 300	11.4	9.6	650
450 × 350	11.4	10.2	600
450 × 400	11.4	10.8	300
500 × 300	12.0	9.6	700
500 × 350	12.0	10.2	650
500 × 400	12.0	10.8	600
500 × 450	12.0	11.4	300
600 × 350	13.2	10.2	750
600 × 400	13.2	10.8	700
600 × 450	13.2	11.4	650
600 × 500	13.2	12.0	600
700 × 400	14.4	10.8	800
700 × 450	14.4	11.4	750
700 × 500	14.4	12.0	700
700 × 600	14.4	13.2	600
800 × 450	15.6	11.4	900
800 × 500	15.6	12.0	800
800 × 600	15.6	13.2	700
800 × 700	15.6	14.4	600
900 × 500	16.8	12.0	1000
900 × 600	16.8	13.2	800
900 × 700	16.8	14.4	700
900 × 800	16.8	15.6	600
1000 × 600	18	13.2	1000
1000 × 700	18	14.4	800
1000 × 800	18	15.6	700
1000 × 900	18	16.8	600
1100 × 700	19.2	14.4	1000
1100 × 800	19.2	15.6	800
1100 × 900	19.2	16.8	700
1100 × 1000	19.2	18.0	600
1200 × 700	20.4	14.4	1345
1200 × 800	20.4	15.6	1160
1200 × 900	20.4	16.8	975
1200 × 1000	20.4	18.0	790
1200 × 1100	20.4	19.2	605
1400 × 800	22.8	15.6	1590
1400 × 900	22.8	16.8	1405
1400 × 1000	22.8	18.0	1220
1400 × 1100	22.8	19.2	1035
1400 × 1200	22.8	20.4	850
1500 × 900	24.0	16.8	1620
1500 × 1000	24.0	18.0	1435
1500 × 1100	24.0	19.2	1250
1500 × 1200	24.0	20.4	1065
1500 × 1400	24.0	22.8	695
1600 × 1000	25.2	18.0	1650
1600 × 1100	25.2	19.2	1465
1600 × 1200	25.2	20.4	1280
1600 × 1400	25.2	22.8	910
1600 × 1500	25.2	24.0	725
1800 × 1100	27.6	19.2	1895
1800 × 1200	27.6	20.4	1710
1800 × 1400	27.6	22.8	1340
1800 × 1500	27.6	24.0	1155
1800 × 1600	27.6	25.2	970
2000 × 1200	30	20.4	2140
2000 × 1400	30	22.8	1770
2000 × 1500	30	24.0	1585
2000 × 1600	30	25.2	1400
2000 × 1800	30	27.6	1030

Source: AQUAFITTING fixed-flange and T-type joint catalogue, page 26–27. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. The two 400 × 300 length variants are retained separately; confirm the selected configuration.

100 × 80

T: 7.2 · t: 7.0 · L: 200

150 × 80

T: 7.8 · t: 7.0 · L: 400

150 × 100

T: 7.8 · t: 7.2 · L: 300

200 × 100

T: 8.4 · t: 7.2 · L: 600

200 × 150

T: 8.4 · t: 7.8 · L: 300

250 × 150

T: 9.0 · t: 7.8 · L: 600

250 × 200

T: 9.0 · t: 8.4 · L: 300

300 × 150

T: 9.6 · t: 7.8 · L: 650

300 × 200

T: 9.6 · t: 8.4 · L: 600

300 × 250

T: 9.6 · t: 9.0 · L: 300

350 × 200

T: 10.2 · t: 8.4 · L: 650

350 × 250

T: 10.2 · t: 9.0 · L: 600

350 × 300

T: 10.2 · t: 9.6 · L: 300

400 × 200

T: 10.8 · t: 8.4 · L: 700

400 × 250

T: 10.8 · t: 9.0 · L: 650

400 × 300

T: 10.8 · t: 9.6 · L: 300

400 × 300

T: 10.8 · t: 9.6 · L: 600

400 × 350

T: 10.8 · t: 10.2 · L: 300

450 × 250

T: 11.4 · t: 9.0 · L: 700

450 × 300

T: 11.4 · t: 9.6 · L: 650

450 × 350

T: 11.4 · t: 10.2 · L: 600

450 × 400

T: 11.4 · t: 10.8 · L: 300

500 × 300

T: 12.0 · t: 9.6 · L: 700

500 × 350

T: 12.0 · t: 10.2 · L: 650

500 × 400

T: 12.0 · t: 10.8 · L: 600

500 × 450

T: 12.0 · t: 11.4 · L: 300

600 × 350

T: 13.2 · t: 10.2 · L: 750

600 × 400

T: 13.2 · t: 10.8 · L: 700

600 × 450

T: 13.2 · t: 11.4 · L: 650

600 × 500

T: 13.2 · t: 12.0 · L: 600

700 × 400

T: 14.4 · t: 10.8 · L: 800

700 × 450

T: 14.4 · t: 11.4 · L: 750

700 × 500

T: 14.4 · t: 12.0 · L: 700

700 × 600

T: 14.4 · t: 13.2 · L: 600

800 × 450

T: 15.6 · t: 11.4 · L: 900

800 × 500

T: 15.6 · t: 12.0 · L: 800

800 × 600

T: 15.6 · t: 13.2 · L: 700

800 × 700

T: 15.6 · t: 14.4 · L: 600

900 × 500

T: 16.8 · t: 12.0 · L: 1000

900 × 600

T: 16.8 · t: 13.2 · L: 800

900 × 700

T: 16.8 · t: 14.4 · L: 700

900 × 800

T: 16.8 · t: 15.6 · L: 600

1000 × 600

T: 18 · t: 13.2 · L: 1000

1000 × 700

T: 18 · t: 14.4 · L: 800

1000 × 800

T: 18 · t: 15.6 · L: 700

1000 × 900

T: 18 · t: 16.8 · L: 600

1100 × 700

T: 19.2 · t: 14.4 · L: 1000

1100 × 800

T: 19.2 · t: 15.6 · L: 800

1100 × 900

T: 19.2 · t: 16.8 · L: 700

1100 × 1000

T: 19.2 · t: 18.0 · L: 600

1200 × 700

T: 20.4 · t: 14.4 · L: 1345

1200 × 800

T: 20.4 · t: 15.6 · L: 1160

1200 × 900

T: 20.4 · t: 16.8 · L: 975

1200 × 1000

T: 20.4 · t: 18.0 · L: 790

1200 × 1100

T: 20.4 · t: 19.2 · L: 605

1400 × 800

T: 22.8 · t: 15.6 · L: 1590

1400 × 900

T: 22.8 · t: 16.8 · L: 1405

1400 × 1000

T: 22.8 · t: 18.0 · L: 1220

1400 × 1100

T: 22.8 · t: 19.2 · L: 1035

1400 × 1200

T: 22.8 · t: 20.4 · L: 850

1500 × 900

T: 24.0 · t: 16.8 · L: 1620

1500 × 1000

T: 24.0 · t: 18.0 · L: 1435

1500 × 1100

T: 24.0 · t: 19.2 · L: 1250

1500 × 1200

T: 24.0 · t: 20.4 · L: 1065

1500 × 1400

T: 24.0 · t: 22.8 · L: 695

1600 × 1000

T: 25.2 · t: 18.0 · L: 1650

1600 × 1100

T: 25.2 · t: 19.2 · L: 1465

1600 × 1200

T: 25.2 · t: 20.4 · L: 1280

1600 × 1400

T: 25.2 · t: 22.8 · L: 910

1600 × 1500

T: 25.2 · t: 24.0 · L: 725

1800 × 1100

T: 27.6 · t: 19.2 · L: 1895

1800 × 1200

T: 27.6 · t: 20.4 · L: 1710

1800 × 1400

T: 27.6 · t: 22.8 · L: 1340

1800 × 1500

T: 27.6 · t: 24.0 · L: 1155

1800 × 1600

T: 27.6 · t: 25.2 · L: 970

2000 × 1200

T: 30 · t: 20.4 · L: 2140

2000 × 1400

T: 30 · t: 22.8 · L: 1770

2000 × 1500

T: 30 · t: 24.0 · L: 1585

2000 × 1600

T: 30 · t: 25.2 · L: 1400

2000 × 1800

T: 30 · t: 27.6 · L: 1030

START AN ENQUIRY

Product overview

Connect flanged components of different nominal sizes.

Connection interface

Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Connection arrangement

Larger flange DN → smaller flange dn

Request a Quote

Technical evidence

Review the product identity and available resources, then send the required size or measured outside diameter, pipe material, connection details, operating conditions, quantity, destination and supporting files.

Request a Quote

Double-Flanged Tapers catalogue drawing, available on request.

Double-Flanged Tapers catalogue dimension table, available on request.

START AN ENQUIRY

START AN ENQUIRY

Connection and selection

Two flange sizes

Specify both nominal sizes and the installation length. Use the taper drawing for the selected pair.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Request a Quote

START AN ENQUIRY

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Request a Quote

Product FAQs

What should I send for a Double-Flanged Tapers enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Double-Flanged Tapers?

The ISO2531 fixed-flange catalogue (pages 26-27) shows DN x dn, T, t and L rows plus Mass columns labelled PN10, PN16 and PN25, with taper drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Materials & standards

Body
Ductile iron EN-GJS-450-10 or EN-GJS-500-7

Gaskets (where supplied)
EPDM (WRAS approved material) or NBR

Bolts and nuts (where supplied)
Zinc-plated carbon steel, Dacromet-coated or stainless steel

Coating
Epoxy powder coating, 250 μm nominal (WRAS approved material)

Pressure rating
PN10, PN16, PN25 or PN40, as shown in the size table for each model

Standard
ISO 2531

Material, bolt and coating options are confirmed in the quotation.
View certificates →

Technical Downloads

Request a Quote

Product summary · PDF · English

Catalogues & Downloads

Double-Flanged 45° Bend

Fixed Flange Fittings

Double-Flanged 45° Bend for 45-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT

Double-Flanged 11.25° Bend

Fixed Flange Fittings

Double-Flanged 11.25° Bend for 11.25-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT

All-Flanged Tees

Fixed Flange Fittings

All-Flanged Tees for fixed-flange branch enquiries with specified main and branch sizes. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT