Double-Flanged 11.25° Bend

Connection and selection

11.25° direction change

Match the bend angle to the pipeline route. Check the drawing for installation length and clearance.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Product summary · PDF · English

Catalogue dimensions

Source: AQUAFITTING fixed-flange and T-type joint catalogue, page 21. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. The source lists alternative lengths for some nominal sizes. Select the matching drawing. DN1800 and DN2000 lengths need confirmation and are not adopted.

Double-Flanged 11.25° Bend — Catalogue dimensions
DN	e	L
80	7.0	113
80	7.0	130
100	7.2	115
100	7.2	140
150	7.8	113
150	7.8	160
200	8.4	132
200	8.4	180
250	9.0	165
250	9.0	350
300	9.6	175
300	9.6	400
350	10.2	191
350	10.2	298
400	10.8	205
400	10.8	324
450	11.4	349
500	12.0	375
600	13.2	426
700	14.4	478
800	15.6	529
900	16.8	581
1000	18.0	632
1100	19.2	683
1200	20.4	735
1400	22.8	835
1500	24.0	885
1600	25.2	940
1800	27.6	—
2000	30	—

Technical Downloads

Catalogues & Downloads

Product FAQs

What should I send for a Double-Flanged 11.25° Bend enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Double-Flanged 11.25° Bend?

Our catalogue reference (ISO2531 fixed-flange catalogue page 21) shows DN, e and L rows plus Mass columns labelled PN10, PN16 and PN25, with product drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Product summary · PDF · English

Double-Flanged 11.25° Bend

Change pipeline direction through 11.25° between two flanges. Specify the bend angle and flange size together.

Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Overview · Specifications · Downloads

Overview

Catalogue dimensions

DN	e	L
80	7.0	113
80	7.0	130
100	7.2	115
100	7.2	140
150	7.8	113
150	7.8	160
200	8.4	132
200	8.4	180
250	9.0	165
250	9.0	350
300	9.6	175
300	9.6	400
350	10.2	191
350	10.2	298
400	10.8	205
400	10.8	324
450	11.4	349
500	12.0	375
600	13.2	426
700	14.4	478
800	15.6	529
900	16.8	581
1000	18.0	632
1100	19.2	683
1200	20.4	735
1400	22.8	835
1500	24.0	885
1600	25.2	940
1800	27.6	—
2000	30	—

Source: AQUAFITTING fixed-flange and T-type joint catalogue, page 21. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. The source lists alternative lengths for some nominal sizes. Select the matching drawing. DN1800 and DN2000 lengths need confirmation and are not adopted.

80

e: 7.0 · L: 113

80

e: 7.0 · L: 130

100

e: 7.2 · L: 115

100

e: 7.2 · L: 140

150

e: 7.8 · L: 113

150

e: 7.8 · L: 160

200

e: 8.4 · L: 132

200

e: 8.4 · L: 180

250

e: 9.0 · L: 165

250

e: 9.0 · L: 350

300

e: 9.6 · L: 175

300

e: 9.6 · L: 400

350

e: 10.2 · L: 191

350

e: 10.2 · L: 298

400

e: 10.8 · L: 205

400

e: 10.8 · L: 324

450

e: 11.4 · L: 349

500

e: 12.0 · L: 375

600

e: 13.2 · L: 426

700

e: 14.4 · L: 478

800

e: 15.6 · L: 529

900

e: 16.8 · L: 581

1000

e: 18.0 · L: 632

1100

e: 19.2 · L: 683

1200

e: 20.4 · L: 735

1400

e: 22.8 · L: 835

1500

e: 24.0 · L: 885

1600

e: 25.2 · L: 940

1800

e: 27.6 · L: —

2000

e: 30 · L: —

Product overview

Change pipeline direction through 11.25° between two flanges.

Connection interface

Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Connection arrangement

Flange → 11.25° bend → flange

Technical evidence

Review the product identity and available resources, then send the required size or measured outside diameter, pipe material, connection details, operating conditions, quantity, destination and supporting files.

Request a Quote

Double-Flanged 11.25° Bend catalogue drawing, available on request.

Double-Flanged 11.25° Bend catalogue dimension table, available on request.

Connection and selection

11.25° direction change

Match the bend angle to the pipeline route. Check the drawing for installation length and clearance.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Product summary · PDF · English

Product FAQs

What should I send for a Double-Flanged 11.25° Bend enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Double-Flanged 11.25° Bend?

Our catalogue reference (ISO2531 fixed-flange catalogue page 21) shows DN, e and L rows plus Mass columns labelled PN10, PN16 and PN25, with product drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Materials & standards

Body
Ductile iron EN-GJS-450-10 or EN-GJS-500-7

Gaskets (where supplied)
EPDM (WRAS approved material) or NBR

Bolts and nuts (where supplied)
Zinc-plated carbon steel, Dacromet-coated or stainless steel

Coating
Epoxy powder coating, 250 μm nominal (WRAS approved material)

Pressure rating
PN10, PN16, PN25 or PN40, as shown in the size table for each model

Standard
ISO 2531

Material, bolt and coating options are confirmed in the quotation.
View certificates →

Technical Downloads

Request a Quote

Catalogues & Downloads

Double-Flanged 45° Bend

Fixed Flange Fittings

Double-Flanged 45° Bend for 45-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

Double-Flanged 22.5° Bend

Fixed Flange Fittings

Double-Flanged 22.5° Bend for 22.5-degree fixed-flange direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

All-Flanged Tees

Fixed Flange Fittings

All-Flanged Tees for fixed-flange branch enquiries with specified main and branch sizes. Send the required sizes, working pressure, connection details and project drawing for review.

Double-Flanged Tapers

Fixed Flange Fittings

Double-Flanged Tapers for fixed-flange diameter-transition enquiries. Send the required sizes, working pressure, connection details and project drawing for review.