Double Socket Bend 11.25°
Change a PVC pipeline direction through 11.25°. Two socket interfaces connect the adjoining pipe ends.
Pipe compatibility
PVC pipe at the socket connection. Match the actual pipe outside diameter, socket geometry and gasket configuration.
Product overview
Change a PVC pipeline direction through 11.25°.
Pipe compatibility
PVC pipe at the socket connection. Match the actual pipe outside diameter, socket geometry and gasket configuration.
Connection arrangement
PVC pipe → 11.25° bend → PVC pipe
Connection and selection
11.25° bend
Match the bend angle to the pipeline route. Use the corresponding drawing for length and height.
Socket fit
Match the pipe outside diameter to the selected socket configuration. Nominal size and measured pipe outside diameter are separate checks.
Assembly selection
Use the product-specific drawing and size row. Specify the gasket, service conditions and required quantity.
Socket dimensions
Source: AQUAFITTING PVC fitting 2022, page 3, 11.25° bend. L is the socket length marked on the AQUAFITTING drawing; it is not the overall fitting length. Request the current 11.25° drawing to confirm H and installation clearances for the selected size.
Technical Downloads
Request current drawings and product documents for your selected configuration.
Historical catalogue references
Original reference images are retained below. Confirm current dimensions, pressure, materials and suitability for the selected configuration before quotation.
The historical 11.25° table repeats H values from the 90° table. Request a confirmed drawing for the required size.
Drawing / table / product reference 1 · Drawing / table / product reference 2 · Other catalogue photo 1 · Other catalogue photo 2 · Other catalogue photo 3 · Other catalogue photo 4 · Other catalogue photo 5
Product FAQs
What should I send for a Double Socket Bend 11.25° enquiry?
Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.
What technical evidence is available for Double Socket Bend 11.25°?
Aquafitting-owned evidence is recorded as Aquafitting-owned PVC Fitting 2022 catalogue, showing product-specific DN, L and H dimension rows with an owned drawing. It is historical selection evidence and must be checked against the current enquiry before quotation.
Which details still require Aquafitting confirmation?
Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.
Product selection
product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available
