top of page

Loose-Flanged Cross

Create a cross connection between flanged pipeline components. Select the fitting geometry and mating interfaces together.

Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Aquafitting Loose-Flanged Cross product view on a controlled background.
Request a QuoteProduct summary · PDF · English

Product overview

Create a cross connection between flanged pipeline components.

Connection interface

Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Connection arrangement

Flanged main line → two branch interfaces

Request a Quote

Connection and selection

Four interfaces

Specify the required connection sizes and orientation. Review the cross drawing and its installation dimensions.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Request a Quote

Catalogue dimensions

Source: AQUAFITTING loose flange fittings catalogue, page 8, upper table. L and H follow the source drawing. Confirm dimensions and flange drilling for the selected configuration.

Loose-Flanged Cross — Catalogue dimensions
Size DNLH
65330165
80330165
100360180
125400200
150440220
200520260
250700350
300800400
350850425

Technical Downloads

Product summary · PDF · English

Catalogues & Downloads

Product FAQs

What should I send for a Loose-Flanged Cross enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Loose-Flanged Cross?

The loose-flange catalogue page shows DN, L and H rows, PN10/16 notation, EN545 pattern references and section drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Request a Quote

Loose-Flanged Cross

Aquafitting Loose-Flanged Cross product view on a controlled background.

Create a cross connection between flanged pipeline components. Select the fitting geometry and mating interfaces together.

Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Product summary · PDF · English

Request a Quote

Overview · Specifications · Downloads

Overview

Catalogue dimensions

Size DN
L
H
65
330
165
80
330
165
100
360
180
125
400
200
150
440
220
200
520
260
250
700
350
300
800
400
350
850
425

Source: AQUAFITTING loose flange fittings catalogue, page 8, upper table. L and H follow the source drawing. Confirm dimensions and flange drilling for the selected configuration.

65

L: 330 · H: 165

80

L: 330 · H: 165

100

L: 360 · H: 180

125

L: 400 · H: 200

150

L: 440 · H: 220

200

L: 520 · H: 260

250

L: 700 · H: 350

300

L: 800 · H: 400

350

L: 850 · H: 425

Product overview

Create a cross connection between flanged pipeline components.

Connection interface

Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.

Connection arrangement

Flanged main line → two branch interfaces

Request a Quote

Technical evidence

Review the product identity and available resources, then send the required size or measured outside diameter, pipe material, connection details, operating conditions, quantity, destination and supporting files.

Loose-Flanged Cross catalogue drawing, available on request.
Loose-Flanged Cross catalogue dimension table, available on request.

Connection and selection

Four interfaces

Specify the required connection sizes and orientation. Review the cross drawing and its installation dimensions.

Flange interface

Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.

Size and installation

Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.

Request a Quote

Product selection

product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available

Request a Quote

Product FAQs

What should I send for a Loose-Flanged Cross enquiry?

Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.

What technical evidence is available for Loose-Flanged Cross?

The loose-flange catalogue page shows DN, L and H rows, PN10/16 notation, EN545 pattern references and section drawing. Dimensions are confirmed against your enquiry before quotation.

Which details still require Aquafitting confirmation?

Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.

Materials & standards

Body
Ductile iron EN-GJS-450-10 or EN-GJS-500-7


Gaskets (where supplied)
EPDM (WRAS approved material) or NBR


Bolts and nuts (where supplied)
Zinc-plated carbon steel, Dacromet-coated or stainless steel


Coating
Epoxy powder coating, 250 μm nominal (WRAS approved material)


Pressure rating
PN10, PN16, PN25 or PN40, as shown in the size table for each model


Standard
ISO 2531


Material, bolt and coating options are confirmed in the quotation.
View certificates →

Loose-Flanged 11.25° Bend

Loose-Flanged 11.25° Bend

Loose Flange Fittings

Loose-Flanged 11.25° Bend for 11.25-degree direction-change enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT
Loose-Flanged Tee

Loose-Flanged Tee

Loose Flange Fittings

Loose-Flanged Tee for three-way branch enquiries with specified main and branch sizes. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT
Loose-Flanged Anchoring Sleeve

Loose-Flanged Anchoring Sleeve

Loose Flange Fittings

Loose-Flanged Anchoring Sleeve for anchoring-sleeve configuration enquiries requiring project review. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT
Double Loose-Flanged S-Pipe

Double Loose-Flanged S-Pipe

Loose Flange Fittings

Double Loose-Flanged S-Pipe for offset or S-profile connection enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT
Loose-Flanged Spigot

Loose-Flanged Spigot

Loose Flange Fittings

Loose-Flanged Spigot for loose-flanged-to-spigot transition enquiries. Send the required sizes, working pressure, connection details and project drawing for review.

VIEW PRODUCT
bottom of page