Loose-Flanged Tee
Create a flanged branch with a loose-flanged tee. Select the fitting geometry and mating interfaces together.
Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.
Product overview
Create a flanged branch with a loose-flanged tee.
Connection interface
Connects to a compatible mating flange. Select by flange DN, drilling, gasket and service conditions; the flange interface does not imply compatibility with every pipe material.
Connection arrangement
Flanged main line → flanged branch
Connection and selection
Main and branch
Specify the main DN and branch dn separately. Check the branch position and installation dimensions.
Flange interface
Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.
Size and installation
Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.
Catalogue dimensions
Source: AQUAFITTING Loose Flange Fittings catalogue, page 7. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. — means not stated in the source.
| Size DN | dn | L | H |
|---|---|---|---|
| 40 | 40 | 250 | 125 |
| 50 | 40 | 275 | 130 |
| 50 | 50 | 275 | 135 |
| 60 | 60 | 295 | 145 |
| 60 | 40 | — | — |
| 65 | 40 | 270 | 100 |
| 65 | 50 | 295 | 130 |
| 65 | 65 | 305 | 150 |
| 80 | 40 | 305 | 130 |
| 80 | 50 | 305 | 135 |
| 80 | 60 | 310 | 155 |
| 80 | 65 | 305 | 150 |
| 80 | 80 | 325 | 160 |
| 100 | 40 | 320 | 145 |
| 100 | 50 | 315 | 145 |
| 100 | 60 | 315 | 160 |
| 100 | 65 | 320 | 165 |
| 100 | 80 | 325 | 165 |
| 100 | 100 | 355 | 175 |
| 125 | 40 | 325 | 155 |
| 125 | 50 | 325 | 160 |
| 125 | 65 | 325 | 175 |
| 125 | 80 | 345 | 180 |
| 125 | 125 | 400 | 200 |
| 150 | 40 | 335 | 165 |
| 150 | 50 | 335 | 175 |
| 150 | 60 | 335 | 185 |
| 150 | 65 | 340 | 190 |
| 150 | 80 | 355 | 195 |
| 150 | 100 | 375 | 200 |
| 150 | 125 | 405 | 210 |
| 150 | 150 | 435 | 215 |
| 200 | 40 | 360 | 190 |
| 200 | 50 | 360 | 205 |
| 200 | 60 | 360 | 210 |
| 200 | 65 | 360 | 210 |
| 200 | 80 | 375 | 220 |
| 200 | 100 | 395 | 225 |
| 200 | 150 | 455 | 240 |
| 200 | 200 | 515 | 255 |
| 250 | 80 | 405 | 265 |
| 250 | 100 | 425 | 270 |
| 250 | 150 | 485 | 280 |
| 250 | 200 | 535 | 285 |
| 250 | 250 | 600 | 300 |
| 300 | 80 | 420 | 290 |
| 300 | 100 | 445 | 295 |
| 300 | 150 | 500 | 305 |
| 300 | 200 | 565 | 320 |
| 300 | 250 | 615 | 325 |
| 300 | 300 | 680 | 340 |
| 400 | 100 | 490 | 360 |
| 400 | 200 | 610 | 380 |
| 500 | 500 | 1000 | 500 |
Technical Downloads
Product FAQs
What should I send for a Loose-Flanged Tee enquiry?
Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.
What technical evidence is available for Loose-Flanged Tee?
The loose-flange catalogue page shows DN/dn, L and H rows, PN10/16 notation, EN545 pattern references and section drawing. Dimensions are confirmed against your enquiry before quotation.
Which details still require Aquafitting confirmation?
Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.
Product selection
product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available
