Loose-Flanged Spigot
Connect a flanged component to a compatible socket through a spigot end. Select the fitting geometry and mating interfaces together.
Connection interface
Flange at one end; a compatible receiving socket at the spigot end. Confirm the mating socket geometry and pipe system separately.
Product overview
Connect a flanged component to a compatible socket through a spigot end.
Connection interface
Flange at one end; a compatible receiving socket at the spigot end. Confirm the mating socket geometry and pipe system separately.
Connection arrangement
Flange → spigot end → compatible socket
Connection and selection
Two different interfaces
Match the flange on one side and the receiving socket and spigot geometry on the other.
Flange interface
Match the flange DN and drilling to the mating component. Select the gasket and fasteners for the specified assembly.
Size and installation
Check the product-specific drawing for the required lengths and clearances. Confirm current pressure applicability and available sizes for the project.
Catalogue dimensions
Source: AQUAFITTING Loose Flange Fittings catalogue, page 9. Dimension symbols follow the corresponding source drawing. Confirm the selected configuration and current dimensions before ordering. Source size and length values are retained; confirm the selected drawing.
Technical Downloads
Request current drawings and product documents for your selected configuration.
Product FAQs
What should I send for a Loose-Flanged Spigot enquiry?
Send the required DN/OD and any main/branch or inlet/outlet size, working pressure, flange drilling or socket/pipe details, quantity, destination and any project drawing or document requirement.
What technical evidence is available for Loose-Flanged Spigot?
The loose-flange catalogue page shows DN and L rows, PN10/16 notation, EN545 pattern references and section drawing. Dimensions are confirmed against your enquiry before quotation.
Which details still require Aquafitting confirmation?
Confirm current size availability, working pressure, material, gasket, coating, flange drilling or socket/pipe interface, dimensions, mass, standard applicability, documents and project suitability before quotation.
Product selection
product name; required DN/OD and any main/branch or inlet/outlet size; working pressure or pressure class; flange drilling or socket/pipe details; material/coating requirement; quantity; destination; required documents; project drawing if available
